Cutting Machine Monthly And Quarterly Maintenance

1. Check whether there is garbage in the main air inlet, and whether the valves and pressure gauges are working normally.
2. Check whether all air pipe joints are loose, and all pipe straps are not damaged. Tighten or replace as necessary.
3. Check whether all transmission parts are loose, check the meshing of gears and racks, and adjust if necessary.
4. Loosen the tightening device and push the block by hand to check whether it can come and go freely. If there is any abnormality, adjust or replace it in time.
5. Check whether the clamping block, steel belt and guide wheel are loose, and whether the steel belt is tight, and adjust it if necessary.
6. Check the performance of all buttons and selector switches, replace damaged ones, and finally draw a comprehensive inspection graphic to check the accuracy of the machine.